Office Partitioning Types
Glass, Demountable, Solid
Avent 50mm Composite
Avent 50mm composite partitioning is a fully demountable and re-locatable aluminium system that is quick and easy to install and extremely cost effective where acoustics and fire rating are not critical. It is based on a module width of 1200mm constructed using aluminium upright H posts and channels. Solid construction is achieved with the use of plasterboard faced honeycomb faced flax core panels.
There is a choice of single, offset single and double glazed sections that can accommodate Venetian blinds. All aluminium profiles can be finished in any BS or RAL colour. Door veneers include sapele, cherry, oak, Ash, Koto, Maple and Beech.
More examples of this system can be found on our gallery page.
Avent 75mm & 100mm
Avent 75mm and 100mm systems are versatile, demountable and re locatable partitions.They provide up to one hour fire resistance as well as high levels of sound reduction up to 52db.These systems are suitable for all office and light industrial areas. Construction is achieved using aluminium head channels and galvanised steel studs that form upright posts, clad either side with one or two layers of 12.5mm plaster board creating a 75mm or 100mm overall partition thickness. All joints are either tape and jointed for a flush wall appearance or covered with aluminium cover trims. The plaster board panels can receive a vinyl wall paper or paint finish.
Glazed options include centre single, single offset and double glazed in the 75mm type and single centre and double glazed in the 100mm system. Venetian blinds are easily accommodated into single or double glazed partitions. All aluminium profiles can be finished in any BS or RAL colour . Door veneers include sapele, cherry, oak, Ash, Koto, Maple and Beech.
More examples of this system can be found on our gallery page.
Avent Timber
Avent timber systems provides the natural look and finish of timber to create a high quality appearance for receptions, conference suites, boardrooms or general office areas.This can be achieved using natural wood or the more economical veneer finished MDF. These systems have been designed to be a fully fire and sound partition solution.
Avent timber partitions are non – load bearing that offer all the benefits of our other systems but with timber trims, glazing sections, door frames and skirting. They can be easily installed and then relocated in any further office refurbishments. Favourite choices of finishes are Cherry, Ash, Oak, Beech and Maple for the partitioning sections with doors in matching veneer.
Glazing sections can be single or double glazed and can accommodate Venetian blinds.
More examples of this system can be found on our gallery page
Avent Frameless
A full height frameless glazed partition system gives your office a spacious feel allowing the maximum amount of light through. This stylish glass partition system is available in both single and double glazed with acoustic rating of up to 47db. It uses a minimum number of aluminium profiles to gain a frameless appearance and either 10mm or 12mm toughened glass depending on the height. Vertical silicone joints maintain the visual simplicity of the product or clear plastic jointing sections to provide dry joints that make the system fully demountable.
Where desired or in order to comply with building regulations, fully glazed panels may have manifestation films applied to them. These can be used to simply highlight the presence of the partitions, create individual designs or incorporate company logos Manifestation is ideal for creating privacy yet still gives the impression of an open office. At Avent Interiors we also offer glass manifestation - either in conjunction with the fitting of panels or as a standalone service.
More examples of this system can be found on our gallery page
